BSOD 0x00000050 PAGE_FAULT_IN_NONPAGED

	B O A R D
	» Board » Zadaj pytanie » Archiwum » Szukaj » Stylizacja

M E N U

» Nowości

» Archiwum

» Recenzje / Testy

» Board

» Rejestracja

Szukaj @ TwojePC

	OBECNI NA TPC
	» Master/Pe 07:34 » Syzyf 07:21 » NimnuL 07:08 » Dhoine 06:49 » PeKa 06:01 » McSlavko 05:40 » hokr 05:18 » Mav 05:10 » Bergerac 05:02 » tian 03:49 Dzisiaj przeczytano 41110 postów, wczoraj 25974 Szybkie ładowanie jest: włączone.

ccc

A R C H I W A L N A W I A D O M O Ś Ć

BSOD 0x00000050 PAGE_FAULT_IN_NONPAGED_AREA , rkowalcz 5/09/14 16:28
Taki komunikat jest przy uruchamianiu Windows Vista na laptopie. Najlepsze jest to, że jak podepnę ten dysk do laptopa z Win 8.1 (przejściówka usb) to momentalnie jest blue screen i ten sam błąd. Podpięcie do komputera z Windows 7 ma te same objawy. Podpięcie przez kabel Sata do komputera restartuje komputera zaraz przy uruchamianiu (oczywiście nie startuję systemu z tego laptopowego dysku).
Co to może być?

zobacz to , ulan 5/09/14 19:24
http://translate.google.pl/...in%2Bnonpaged%2Barea
pozdr. ułan vel ulan
"Uwielbiam zapach napalmu
o poranku..."
opss to , ulan 5/09/14 19:26
http://www.sevenforums.com/...-non-paged-area.html
tamto było tłumaczone
pozdr. ułan vel ulan
"Uwielbiam zapach napalmu
o poranku..."
1. tylko jak , rkowalcz 5/09/14 20:51
  go podłączyć pod Windowsa? :-)
  zaraz sprawdzę na linuxie
  1. w najgorszym razie , ulan 5/09/14 21:04
    format i instalacja systemu od nowa
    a próbowłaęś go uruchomić w trybie awaryjnym??
    pozdr. ułan vel ulan
    "Uwielbiam zapach napalmu
    o poranku..."
    1. wpierw SMART może nie ma czego już formatować... , Artaa 5/09/14 21:05
      http://techformator.pl/...dego-odczyt-smart-linux/
      1. smart , rkowalcz 6/09/14 10:32
        smartctl 5.41 2011-06-09 r3365 [i686-linux-3.0.4-pmagic] (local build)
        Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
        
        === START OF INFORMATION SECTION ===
        Model Family: Western Digital Scorpio Blue Serial ATA
        Device Model: WDC WD1600BEVT-60ZCT1
        Serial Number: WD-WXCY08A14895
        LU WWN Device Id: 5 0014ee 2acf324dc
        Firmware Version: 13.01A13
        User Capacity: 160,041,885,696 bytes [160 GB]
        Sector Size: 512 bytes logical/physical
        Device is: In smartctl database [for details use: -P show]
        ATA Version is: 8
        ATA Standard is: Exact ATA specification draft version not indicated
        Local Time is: Sat Sep 6 08:29:15 2014 UTC
        SMART support is: Available - device has SMART capability.
        SMART support is: Enabled
        
        === START OF READ SMART DATA SECTION ===
        SMART overall-health self-assessment test result: PASSED
        
        General SMART Values:
        Offline data collection status: (0x00) Offline data collection activity
        was never started.
        Auto Offline Data Collection: Disabled.
        Self-test execution status: ( 0) The previous self-test routine completed
        without error or no self-test has ever
        been run.
        Total time to complete Offline
        data collection: ( 5160) seconds.
        Offline data collection
        capabilities: (0x51) SMART execute Offline immediate.
        No Auto Offline data collection support.
        Suspend Offline collection upon new
        command.
        No Offline surface scan supported.
        Self-test supported.
        No Conveyance Self-test supported.
        Selective Self-test supported.
        SMART capabilities: (0x0003) Saves SMART data before entering
        power-saving mode.
        Supports SMART auto save timer.
        Error logging capability: (0x01) Error logging supported.
        General Purpose Logging supported.
        Short self-test routine
        recommended polling time: ( 2) minutes.
        Extended self-test routine
        recommended polling time: ( 64) minutes.
        SCT capabilities: (0x303f) SCT Status supported.
        SCT Error Recovery Control supported.
        SCT Feature Control supported.
        SCT Data Table supported.
        
        SMART Attributes Data Structure revision number: 16
        Vendor Specific SMART Attributes with Thresholds:
        ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
        1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 21
        3 Spin_Up_Time 0x0027 159 156 021 Pre-fail Always - 1050
        4 Start_Stop_Count 0x0032 087 087 000 Old_age Always - 13971
        5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
        7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
        9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 6920
        10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
        11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
        12 Power_Cycle_Count 0x0032 092 092 000 Old_age Always - 8020
        187 Reported_Uncorrect 0x0032 100 091 000 Old_age Always - 14
        188 Command_Timeout 0x0032 097 032 000 Old_age Always - 6442
        190 Airflow_Temperature_Cel 0x0022 070 048 040 Old_age Always - 30
        192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 243
        193 Load_Cycle_Count 0x0032 156 156 000 Old_age Always - 132488
        194 Temperature_Celsius 0x0022 113 091 000 Old_age Always - 30
        196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
        197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
        198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
        199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 4
        200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0
        
        SMART Error Log Version: 1
        ATA Error Count: 10 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
        Powered_Up_Time is measured from power on, and printed as
        DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
        SS=sec, and sss=millisec. It "wraps" after 49.710 days.
        
        Error 10 occurred at disk power-on lifetime: 6354 hours (264 days + 18 hours)
        When the command that caused the error occurred, the device was active or idle.
        
        After command completion occurred, registers were:
        ER ST SC SN CL CH DH
        -- -- -- -- -- -- --
        01 51 00 83 00 bf 40 Error: AMNF at LBA = 0x00bf0083 = 12517507
        
        Commands leading to the command that caused the error were:
        CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
        -- -- -- -- -- -- -- -- ---------------- --------------------
        60 00 e0 df 01 bf 09 00 00:35:07.922 READ FPDMA QUEUED
        60 00 d8 df 00 bf 09 00 00:35:07.922 READ FPDMA QUEUED
        60 00 d0 df 06 bf 09 00 00:35:07.921 READ FPDMA QUEUED
        60 00 c8 df 05 bf 09 00 00:35:07.921 READ FPDMA QUEUED
        60 00 c0 df 04 bf 09 00 00:35:07.920 READ FPDMA QUEUED
        
        Error 9 occurred at disk power-on lifetime: 2284 hours (95 days + 4 hours)
        When the command that caused the error occurred, the device was active or idle.
        
        After command completion occurred, registers were:
        ER ST SC SN CL CH DH
        -- -- -- -- -- -- --
        40 51 00 90 db 5e 40 Error: UNC at LBA = 0x005edb90 = 6216592
        
        Commands leading to the command that caused the error were:
        CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
        -- -- -- -- -- -- -- -- ---------------- --------------------
        60 00 b0 7f db 5e 0c 00 00:18:13.464 READ FPDMA QUEUED
        2f 00 01 10 00 00 00 00 00:18:13.464 READ LOG EXT
        60 00 a8 7f db 5e 0c 00 00:18:10.226 READ FPDMA QUEUED
        2f 00 01 10 00 00 00 00 00:18:10.226 READ LOG EXT
        60 00 98 7f db 5e 0c 00 00:18:06.889 READ FPDMA QUEUED
        
        Error 8 occurred at disk power-on lifetime: 2284 hours (95 days + 4 hours)
        When the command that caused the error occurred, the device was active or idle.
        
        After command completion occurred, registers were:
        ER ST SC SN CL CH DH
        -- -- -- -- -- -- --
        40 51 00 90 db 5e 40 Error: UNC at LBA = 0x005edb90 = 6216592
        
        Commands leading to the command that caused the error were:
        CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
        -- -- -- -- -- -- -- -- ---------------- --------------------
        60 00 a8 7f db 5e 0c 00 00:18:10.226 READ FPDMA QUEUED
        2f 00 01 10 00 00 00 00 00:18:10.226 READ LOG EXT
        60 00 98 7f db 5e 0c 00 00:18:06.889 READ FPDMA QUEUED
        2f 00 01 10 00 00 00 00 00:18:06.889 READ LOG EXT
        61 08 90 2f 00 5e 00 00 00:18:03.796 WRITE FPDMA QUEUED
        
        Error 7 occurred at disk power-on lifetime: 2284 hours (95 days + 4 hours)
        When the command that caused the error occurred, the device was active or idle.
        
        After command completion occurred, registers were:
        ER ST SC SN CL CH DH
        -- -- -- -- -- -- --
        40 51 00 90 db 5e 40 Error: UNC at LBA = 0x005edb90 = 6216592
        
        Commands leading to the command that caused the error were:
        CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
        -- -- -- -- -- -- -- -- ---------------- --------------------
        60 00 98 7f db 5e 0c 00 00:18:06.889 READ FPDMA QUEUED
        2f 00 01 10 00 00 00 00 00:18:06.889 READ LOG EXT
        61 08 90 2f 00 5e 00 00 00:18:03.796 WRITE FPDMA QUEUED
        61 08 88 47 00 5e 00 00 00:18:03.796 WRITE FPDMA QUEUED
        60 00 80 7f db 5e 0c 00 00:18:03.796 READ FPDMA QUEUED
        
        Error 6 occurred at disk power-on lifetime: 2284 hours (95 days + 4 hours)
        When the command that caused the error occurred, the device was active or idle.
        
        After command completion occurred, registers were:
        ER ST SC SN CL CH DH
        -- -- -- -- -- -- --
        40 51 00 90 db 5e 40 Error: WP at LBA = 0x005edb90 = 6216592
        
        Commands leading to the command that caused the error were:
        CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
        -- -- -- -- -- -- -- -- ---------------- --------------------
        61 08 90 2f 00 5e 00 00 00:18:03.796 WRITE FPDMA QUEUED
        61 08 88 47 00 5e 00 00 00:18:03.796 WRITE FPDMA QUEUED
        60 00 80 7f db 5e 0c 00 00:18:03.796 READ FPDMA QUEUED
        2f 00 01 10 00 00 00 00 00:18:03.795 READ LOG EXT
        60 00 78 7f db 5e 0c 00 00:18:00.569 READ FPDMA QUEUED
        
        SMART Self-test log structure revision number 1
        Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
        # 1 Short offline Completed without error 00% 6919 -
        # 2 Short offline Completed without error 00% 4 -
        # 3 Short offline Completed without error 00% 3 -
        # 4 Short offline Completed without error 00% 2 -
        # 5 Short offline Completed without error 00% 1 -
        
        SMART Selective self-test log data structure revision number 1
        SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
        1 0 0 Not_testing
        2 0 0 Not_testing
        3 0 0 Not_testing
        4 0 0 Not_testing
        5 0 0 Not_testing
        Selective self-test flags (0x0):
        After scanning selected spans, do NOT read-scan remainder of disk.
        If Selective self-test is pending on power-up, resume after 0 minute delay.
jak wygląda SMART , Artaa 5/09/14 21:04
tego HDD.

wstaw obrazek z CDI

http://crystalmark.info/...alDiskInfo/index-e.html
1. jak , RusH 6/09/14 01:46
  ma wstawic skoro odpalenie windowsa z tym dyskiem to restart? :))))
  I fix shit
  http://raszpl.blogspot.com/
  1. podałem obie opcje: Windows i Linux... , Artaa 6/09/14 09:47
    czytanie bezwzrokowe? ;-)
2. smart , rkowalcz 6/09/14 09:51
  | | Thre| Val | Wor| RAW
  Raw Read Error Rate | 1 | 51 | 20 | 200 | 21
  Spin Up Time | 3 |21 | 159 | 156| 1050
  Reallocated sector | 5 | 140| 200 | 200| 0
  Seek Error Rate | 7 | 51 | 200 | 200| 0
  Spin Retry Count | 10 | 51 | 100 |100 | 0
  UDMA Chech Error |199| 0 | 200 | 200| 0
  Write Error Rate |200| 51 |100 | 253 | 0
  1. dziwnie ubogi ten SMART... , Artaa 6/09/14 09:56
    "zapomniałeś" też podać modelu HDD..
    
    tu widać głównie problemy w 01 (RRER) = 21
    1. reszta jest , rkowalcz 6/09/14 10:25
      ok, tylko przy tych było zaznaczone że coś może być nie tak
    2. WD1600BEVT , rkowalcz 6/09/14 10:25
      WD1600BEVT
sciagnij MHDD , RusH 6/09/14 01:46
na bootowalnego pendrive
I fix shit
http://raszpl.blogspot.com/
1. mhdd , rkowalcz 6/09/14 09:45
  brak błędów
próbowałeś , arteqw 6/09/14 15:34
przeinstalować system na nowo ? Co to za laptop ?
Pozdrawiam, Artur
digi-led.pl
1. zgrałem , rkowalcz 6/09/14 16:04
  dane przez linuxa, teraz sprawdzam blędy w linuxie i spróbuje podpiać do żeby przeskanować go antywirusem
  1. po podpięciu , rkowalcz 6/09/14 17:24
    do windows pojawia się i znika dysk, ale jakość udało się zrobić scandisk pod windowsem i skanowanie anywirusem. po tej operacji nawet wystartowała vista na tym laptopie - ale lepiej ten dysk wymienić, albo laptopa przy okazji też.