/Bogus flag probe test/ Co pare dni Zapora MKS

	B O A R D
	» Board » Zadaj pytanie » Archiwum » Szukaj » Stylizacja

M E N U

» Nowości

» Archiwum

» Recenzje / Testy

» Board

» Rejestracja

Szukaj @ TwojePC

	OBECNI NA TPC
	» rooter666 08:00 » DYD 07:58 » KHot 07:53 » hokr 07:45 » Kenny 07:45 » NimnuL 06:47 » Demo 06:43 » PeKa 05:39 » SebaSTS 05:32 » GULIwer 05:04 » Killer 04:52 » Lucyferiu 04:29 » Martens 04:12 Dzisiaj przeczytano 41112 postów, wczoraj 25974 Szybkie ładowanie jest: włączone.

ccc

A R C H I W A L N A W I A D O M O Ś Ć

/Bogus flag probe test/ Co pare dni Zapora MKS_VIR'a wykrywa.. , coolman 1/04/07 17:23
..mi taki atak sieciowy. Podobno jest to sprawdzanie rodzaju systemu operacyjnego, martwic sie ?

http://jet.blog.pl

CHECKFLAG , RusH 1/04/07 19:00
rasz@capek:~$ cat /etc/init.d/firewall
#################################################################################
#
# IPTABLES Firewall v 0.86
# by
#
# Small parts from http://members.optusnet.com.au/~technion/
# and some tutorials

#!/bin/sh

# This is the location of the iptables command
IPTABLES="/sbin/iptables"

case "$1" in
stop)
echo "Shutting down firewall..."
$IPTABLES -F
$IPTABLES -F -t mangle
$IPTABLES -F -t nat
$IPTABLES -X
$IPTABLES -X -t mangle
$IPTABLES -X -t nat

$IPTABLES -P INPUT ACCEPT
$IPTABLES -P OUTPUT ACCEPT
$IPTABLES -P FORWARD ACCEPT
echo "...done"
;;
status)
echo $"Table: filter"
iptables --list
echo $"Table: nat"
iptables -t nat --list
echo $"Table: mangle"
iptables -t mangle --list
;;
restart|reload)
$0 stop
$0 start
;;
start)
echo "Starting Firewall..."
echo ""

##--------------------------Begin Firewall---------------------------------##

#----Default-Interfaces-----#

## Default external interface (used, if EXTIF isn't specified on command line)
#DEFAULT_EXTIF="ppp0"

## Default internal interface (used, if INTIF isn't specified on command line)
#DEFAULT_INTIF="eth0"

#----Special Variables-----#

# IP Mask for all IP addresses
UNIVERSE="0.0.0.0/0"

# Specification of the high unprivileged IP ports.
UNPRIVPORTS="1024:65535"

# Specification of X Window System (TCP) ports.
#XWINPORTS="6000:6063"

# Ports for IRC-Connection-Tracking
#IRCPORTS="6665,6666,6667,6668,6669,7000"

#-----Port-Forwarding Variables-----#

#For port-forwarding to an internal host, define a variable with the appropriate
#internal IP-Address here and take a look at the port-forwarding sections in the FORWARD +
#PREROUTING-chain:

#These are examples, uncomment to activate

#IP for forwarded Battlecom-traffic
#BATTLECOMIP="192.168.0.5"

#IP for forwarded HTTP-traffic
#HTTPIP="192.168.0.20"

#----Flood Variables-----#

# Overall Limit for TCP-SYN-Flood detection
TCPSYNLIMIT="5/s"
# Burst Limit for TCP-SYN-Flood detection
TCPSYNLIMITBURST="10"

# Overall Limit for Loggging in Logging-Chains
#LOGLIMIT="2/s"
# Burst Limit for Logging in Logging-Chains
#LOGLIMITBURST="10"

# Overall Limit for Ping-Flood-Detection
PINGLIMIT="5/s"
# Burst Limit for Ping-Flood-Detection
PINGLIMITBURST="10"

#----Automatically determine infos about involved interfaces-----#

### External Interface:

EXTIF="eth0"

#----Load IPTABLES-modules-----#

#Insert modules- should be done automatically if needed

#If the IRC-modules are available, uncomment them below

echo "Loading IPTABLES modules"

dmesg -n 1 #Kill copyright display on module load
/sbin/modprobe ip_tables
/sbin/modprobe iptable_filter
/sbin/modprobe ip_conntrack
/sbin/modprobe ip_conntrack_ftp
dmesg -n 6

echo " --- "

#----Clear/Reset all chains-----#

#Clear all IPTABLES-chains

#Flush everything, start from scratch
$IPTABLES -F
$IPTABLES -F -t mangle
$IPTABLES -F -t nat
$IPTABLES -X
$IPTABLES -X -t mangle
$IPTABLES -X -t nat

#Set default policies to DROP
$IPTABLES -P INPUT DROP
$IPTABLES -P OUTPUT ACCEPT
$IPTABLES -P FORWARD DROP

#----Set network sysctl options-----#

echo "Setting sysctl options"

#Enable forwarding in kernel
#echo 1 > /proc/sys/net/ipv4/ip_forward

#Disabling IP Spoofing attacks.
echo 2 > /proc/sys/net/ipv4/conf/all/rp_filter

#Don't respond to broadcast pings (Smurf-Amplifier-Protection)
echo "1" > /proc/sys/net/ipv4/icmp_echo_ignore_broadcasts

#Block source routing
echo 0 > /proc/sys/net/ipv4/conf/all/accept_source_route

#Kill timestamps
echo 0 > /proc/sys/net/ipv4/tcp_timestamps

#Enable SYN Cookies
echo 1 > /proc/sys/net/ipv4/tcp_syncookies

#Kill redirects
echo 0 > /proc/sys/net/ipv4/conf/all/accept_redirects

#Enable bad error message protection
echo 1 > /proc/sys/net/ipv4/icmp_ignore_bogus_error_responses

#Log martians (packets with impossible addresses)
#echo 1 > /proc/sys/net/ipv4/conf/all/log_martians

#Set out local port range
echo "32768 61000" > /proc/sys/net/ipv4/ip_local_port_range

#Reduce DoS'ing ability by reducing timeouts
echo 30 > /proc/sys/net/ipv4/tcp_fin_timeout
echo 2400 > /proc/sys/net/ipv4/tcp_keepalive_time
echo 0 > /proc/sys/net/ipv4/tcp_window_scaling
echo 0 > /proc/sys/net/ipv4/tcp_sack

echo " --- "
echo "Creating user-chains"

#log
$IPTABLES -N Loog
# $IPTABLES -A Loog -j LOG --log-prefix "fp=loog:1 a=DROP "
$IPTABLES -A Loog -j DROP

#Logging of possible TCP-SYN-Floods
$IPTABLES -N LSYNFLOOD
# $IPTABLES -A LSYNFLOOD -m limit --limit $LOGLIMIT --limit-burst $LOGLIMITBURST -j LOG --log-prefix "fp=SYNFLOOD:1 a=DROP "
$IPTABLES -A LSYNFLOOD -j DROP

#Logging of possible Ping-Floods
$IPTABLES -N LPINGFLOOD
# $IPTABLES -A LPINGFLOOD -m limit --limit $LOGLIMIT --limit-burst $LOGLIMITBURST -j LOG --log-prefix "fp=PINGFLOOD:1 a=DROP "
$IPTABLES -A LPINGFLOOD -j DROP

#TCP-Packets with one ore more bad flags
$IPTABLES -N LBADFLAG
# $IPTABLES -A LBADFLAG -m limit --limit $LOGLIMIT --limit-burst $LOGLIMITBURST -j LOG --log-prefix "fp=BADFLAG:1 a=DROP "
$IPTABLES -A LBADFLAG -j DROP

#----Create Accept-Chains-----#

#TCPACCEPT - Check for SYN-Floods before letting TCP-Packets in

$IPTABLES -N TCPACCEPT
$IPTABLES -A TCPACCEPT -p tcp --syn -m limit --limit $TCPSYNLIMIT --limit-burst $TCPSYNLIMITBURST -j ACCEPT
$IPTABLES -A TCPACCEPT -p tcp --syn -j LSYNFLOOD
$IPTABLES -A TCPACCEPT -p tcp ! --syn -j ACCEPT

#----Create special User-Chains-----#

#CHECKFLAG - Kill any Inbound/Outbound TCP-Packets with impossible flag-combinations (Some port-scanners use these, eg. nmap Xmas,Null,etc.-scan)

$IPTABLES -N CHECKFLAG
$IPTABLES -A CHECKFLAG -p tcp --tcp-flags ALL FIN,URG,PSH -j LBADFLAG
$IPTABLES -A CHECKFLAG -p tcp --tcp-flags ALL SYN,RST,ACK,FIN,URG -j LBADFLAG
$IPTABLES -A CHECKFLAG -p tcp --tcp-flags ALL ALL -j LBADFLAG
$IPTABLES -A CHECKFLAG -p tcp --tcp-flags ALL NONE -j LBADFLAG
$IPTABLES -A CHECKFLAG -p tcp --tcp-flags SYN,RST SYN,RST -j LBADFLAG
$IPTABLES -A CHECKFLAG -p tcp --tcp-flags SYN,FIN SYN,FIN -j LBADFLAG

#ICMP/TRACEROUTE FILTERING

#Inbound ICMP/Traceroute

$IPTABLES -N ICMP_IN

#Ping Flood protection. Accept $PINGLIMIT echo-requests/sec, rest will be logged/dropped
$IPTABLES -A ICMP_IN -p icmp --icmp-type echo-request -m limit --limit $PINGLIMIT --limit-burst $PINGLIMITBURST -j ACCEPT

$IPTABLES -A ICMP_IN -p icmp --icmp-type echo-request -j DROP

#Block ICMP-address-mask (can help to prevent OS-fingerprinting)
$IPTABLES -A ICMP_IN -p icmp --icmp-type address-mask-request -j DROP
$IPTABLES -A ICMP_IN -p icmp --icmp-type address-mask-reply -j DROP

#Allow all other ICMP in
$IPTABLES -A ICMP_IN -p icmp -j ACCEPT

#----End User-Chains-----#

echo " --- "

#----Start Ruleset-----#

echo "Implementing firewall rules..."

#################
## INPUT-Chain ## (everything that is addressed to the firewall itself)
#################

##GENERAL Filtering

# Kill INVALID packets (not ESTABLISHED, RELATED or NEW)
$IPTABLES -A INPUT -m state --state INVALID -j DROP

# Check TCP-Packets for Bad Flags
$IPTABLES -A INPUT -p tcp -j CHECKFLAG

$IPTABLES -A INPUT -d 255.255.255.255/0.0.0.255 -j DROP
$IPTABLES -A INPUT -d 224.0.0.1 -j DROP

##Packets FROM FIREWALL-BOX ITSELF

#Local IF
$IPTABLES -A INPUT -i lo -j ACCEPT

##Packets FROM EXTERNAL NET

##ICMP & Traceroute filtering

#Filter ICMP
$IPTABLES -A INPUT -i $EXTIF -p icmp -j ICMP_IN

##Public services running ON FIREWALL-BOX (comment out to activate):

# ftp-data
#$IPTABLES -A INPUT -i $EXTIF -p tcp --dport 20 -j TCPACCEPT

# ftp
#$IPTABLES -A INPUT -i $EXTIF -p tcp --dport 21 -j TCPACCEPT

# ssh
#$IPTABLES -A INPUT -i $EXTIF -p tcp --dport 22 -j TCPACCEPT

#telnet
#$IPTABLES -A INPUT -i $EXTIF -p tcp --dport 23 -j TCPACCEPT

# smtp
#$IPTABLES -A INPUT -i $EXTIF -p tcp --dport 25 -j TCPACCEPT

# torrent
$IPTABLES -A INPUT -i $EXTIF -p tcp --dport 31618 -j TCPACCEPT
$IPTABLES -A INPUT -i $EXTIF -p udp --dport 31618 -j ACCEPT

$IPTABLES -A INPUT -i $EXTIF -p tcp --dport 4662 -j TCPACCEPT
$IPTABLES -A INPUT -i $EXTIF -p udp --dport 4662 -j ACCEPT

# http
#$IPTABLES -A INPUT -i $EXTIF -p tcp --dport 80 -j TCPACCEPT

# https
#$IPTABLES -A INPUT -i $EXTIF -p tcp --dport 443 -j TCPACCEPT

# POP-3
#$IPTABLES -A INPUT -i $EXTIF -p tcp --dport 110 -j TCPACCEPT

##Allow ESTABLISHED/RELATED connections in

$IPTABLES -A INPUT -i $EXTIF -m state --state ESTABLISHED -j ACCEPT
$IPTABLES -A INPUT -i $EXTIF -p tcp --dport $UNPRIVPORTS -m state --state RELATED -j TCPACCEPT
$IPTABLES -A INPUT -i $EXTIF -p udp --dport $UNPRIVPORTS -m state --state RELATED -j ACCEPT

##Catch all rule

$IPTABLES -A INPUT -j DROP

#------End Ruleset------#

echo "...done"
echo ""

echo "--> IPTABLES firewall loaded/activated <--"

##--------------------------------End Firewall---------------------------------##

;;
*)
echo "Usage: firewall (start|stop|restart|status) EXTIF INTIF"
exit 1
esac

exit 0

lancuch CHECKFLAG, dzinnie jakies 10 hitow, mozesz tego swojego MKSa zasadzic w rowek osoby, ktora go kupila do firmy, bo ZMNIEJSZA produktywnosc celem szerzenia FUD i promowania sie jako zbawiciela w oczach (l)uzerow.
I fix shit
http://raszpl.blogspot.com/
_______ , coolman 3/04/07 00:48
eeeeeee :| o co chodzi ?! Co to za prog..mozesz jasniej pisac ? Panowie o co mu chodzi ? :D
http://jet.blog.pl
1. no wlasnie o to chodzi , RusH 3/04/07 01:28
  ze jak nie masz pojecia to placisz za mks vira .. i nadal nie masz pojecia, ale jestes biedniejszy
  I fix shit
  http://raszpl.blogspot.com/